Omron D4BL-1CRA-A Guard Lock Safety Door Switch

Description

Omron D4BL-1CRA-A Guard Lock Safety Door Switch
Lock
method
Conduit size
Voltage for
solenoid
Without indicator
1NC/1NO+ 1NC
(Slow-action)
With LED indicator
1NC/1NO+ 1NC
(Slow-action)
Without indicator
2NC+ 1NC
(Slow-action)
With LED indicator
2NC+ 1NC
(Slow-action)
Mechanical
lock
PG13.5
24 VDC
D4BL-1CRA
D4BL-1CRA-A
D4BL-1DRA
D4BL-1DRA-A
G1/2
D4BL-2CRA
D4BL-2CRA-A
D4BL-2DRA
D4BL-2DRA-A
M20
D4BL-4CRA
D4BL-4CRA-A
D4BL-4DRA
D4BL-4DRA-A
Solenoid
lock
Pg 13.5
24 VDC
D4BL-1CRG
D4BL-1CRG-A
D4BL-1DRG
D4BL-1DRG-A
G1/2
D4BL-2CRG
D4BL-2CRG-A
D4BL-2DRG
D4BL-2DRG-A
M20
D4BL-4CRG
D4BL-4CRG-A
D4BL-4DRG
D4BL-4DRG-A
• A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety is achieved using a mechanism where the lock is only released when voltage is applied to the solenoid.
• Conforms to EN (TÜV) standards corresponding to the CE marking.
• Certified by UL, CSA and CCC standards.
• The Switch contact is opened by a direct opening mechanism (NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by
on the Switch.
• Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.
• Tough aluminum die-cast body incorporating a switch box with degree of protection satisfying IP67, UL, and CSA TYPE6P, 13.
• Equipped with a horizontal and vertical conduit opening.
• Models incorporating easy-to-see indicators for monitoring and those using an adjustable Operation Key for a swinging door are available.
• The mounting direction of the head can be changed to allow the Operation Key to be inserted from four directions.
Standards and EC Directives
Conforms to the following EC Directives:
・ Machinery Directive
・ EN ISO 14119
・ EN 60204-1
Certified Standards
Certification body
Standard
File No.
TÜV Rheinland
EN60947-5-1
(certified direct opening)
GS-ET-19
Consult your OMRON
representative for details.
UL
UL508
E76675
CSA
CSA C22.2, No.14
LR45746
CQC (CCC)
GB14048.5
2003010305073836
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB14048.5)
Type
Standard model
Indicator model
Utilization category
AC-15
AC-15
Rated operating current (Ie)
3 A
6 A
Rated operating voltage (Ue)
250 V
115 V
Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device.
UL/CSA (UL508, CSA C22.2 No. 14)
A300
Rated voltage
Carry current
Current (A)
Volt-amperes (VA)
Make
Break
Make
Break
120 VAC
240 VAC
10 A
60
30
6
3
7,200
720
Note: The UL/CSA certified rating for products with indicators (-A) is 6 A/115 VAC.
Characteristics
Degree of protection *1
IP67 (EN60947-5-1)
Durability *2
Mechanical
1,000,000 operations min.
Electrical
500,000 operations min. (10 A resistive load at 250 VAC)
Operating speed
0.05 to 0.5 m/s
Operating frequency
30 operations/minute max.
Direct opening force *3
19.61 N min. (EN60947-5-1)
Direct opening travel *3
20 mm min. (EN60947-5-1)
Holding force
700 N min. (GS-ET-19)
Contact resistance
50 mΩ max.
Rated insulation voltage (Ui)
300 V (EN60947-5-1)
Rated frequency
50/60 Hz
Protection against electric shock
Class I (with ground terminal)
Pollution degree (operating environment)
3 (EN60947-5-1)
Impulse withstand
voltage
(EN60947-5-1)
Between terminals of same polarity
4 kV
Between terminals of different polarity
Between each terminal and ground
Between solenoid and ground
2.5 kV
Insulation resistance
100 MΩ min. (at 500 VDC)
Contact gap
2 × 2 mm min.
Vibration resistance
Malfunction
10 to 55 Hz, 0.35 mm single amplitude
Shock resistance
Destruction
1,000 m/s
2
min.
Malfunction
300 m/s
2
min.
Conditional short-circuit current
100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)
10 A (EN60947-5-1)
Ambient operating temperature
-10 to 55°C (with no icing)
Ambient operating humidity
95% max.
Weight
Approx. 800 g
Note: The above values are initial values.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust, oil or water penetration, do not use the D4BL in places where dust, oil, water, or chemicals may
enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%.
*3. These figures are minimum requirements for safe operation.
Solenoid Coil Characteristics
Type
24 VDC mechanical lock models
24 VDC solenoid lock models
Rated operating voltage
24 VDC (+10%, -15%) (100% ED)
Current consumption
Approx. 300 mA
Insulation class
Class B (130°C or less)
Indicator Characteristics
Rated voltage
10 to 115 VAC/VDC
Current leakage
Approx. 1 mA
Color (LED)
Orange, green
Please call us if you have any questions at
714-871-5558
,
[email protected]
You can pick up from Fullerton, California or Piscataway, New Jersey or we will ship via UPS Ground.
Fullerton Office
2320 E Valencia Dr
Fullerton, CA 92831
Piscataway Office
244 N. Randolphville Road
Piscataway, NJ 08854
www.aceronline.net
Payment
Supra Machine Tool accepts: PayPal, Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our store. (Please send payment to
2320 E Valencia Dr Fullerton, CA 92831
)  All payments must be received within 7 business days.  Bidders can call 714-871-5558 or
[email protected]
for further information.  All buyers residing in California add 8.75% sales tax.
Shipping and Handling
Buyer pays the Shipping charge based on USPS Priority Mail or UPS Ground Shipping Charges.  Orders being shipped to P.O. Boxes will be delivered by United States Postal Services (USPS).  Note: Weight restrictions may apply in some cases.  (Buyers can check for shipping rates at
www.usps.com
).  Orders under 150 lbs. can be shipped by U.P.S., freight prepaid or collect.  Orders above 150 lbs. will be shipped by freight carrier.  Supra Machine Tool offers a group of carriers that can quote you with an estimate of shipping charges for all items.  Check
www.conway.com
,
www.roadway.com
.  Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed.  International buyer pays the actual shipping charge + .50-.50 handling fees.  International shipments of 150 lbs or more can be made by UPS International.  Buyers are responsible for payment of all Shipping and Handling charges on all items.
Terms and Conditions
We guarantee the items are exactly as said in description.  If you do not pay for them in the specified amount of time we have to file a non-paying complaint with eBay.  Thank you for viewing.  Supra Machine Tool appreciates your business very much.
Please visit our
Supra Machine Tool E-bay Store
for a wide selection of parts for milling machine, machining center, surface grinder, and engine lathes.
Please contact us for exact shipping cost
.